Logo Kings Mobile Welding
AWS D1.1 • Mobile Welding • Field Fabrication • Inspection-Ready

Past Performance

Representative mobile welding and structural steel welding work across Hampton Roads, VA and surrounding regions— including industrial welding, commercial contractor support, marine fabrication, solar pile splice welding, and heavy equipment repair. If you’re searching for a mobile welder near me who shows up ready and builds to spec, you’re in the right place.

Request a Quote View Services Commercial • Industrial • Marine • Heavy Civil
Mobile Welding Hampton Roads VA AWS D1.1 Structural Welding Emergency Repairs On-Site Fabrication Contractor / GC Support
Structural welding for a large sign at Old Dominion University tennis courts
Structural Steel • AWS D1.1

University Grounds — ODU Tennis Court Sign Structure

A commercial general contractor hired us to provide AWS D1.1 structural welding for a large custom sign at Old Dominion University’s tennis courts. The sign required heavy-duty steel supports, field fit-up, and on-site fabrication to align with existing foundations and site constraints. We completed certified welds, bracing, and connections on a tight schedule so the contractor could keep the project on track and inspection-ready.

  • AWS D1.1 structural welding for sign frames and supports
  • On-site custom fabrication and field adjustments
  • Coordination with GC and inspectors at an active campus
Request Similar Work Structural Steel
Fixed roof access ladder installation on commercial building in Virginia Beach
Safety Access • Code Compliance

Commercial Facility — Fixed Roof Access Ladder Installation & Modification

A commercial facility in Virginia Beach required a fixed roof access ladder to be safely installed and brought into full code compliance. We coordinated hoisting, set and secured the ladder, and performed multiple on-site modifications to address building conditions and inspection requirements.

  • Hoisting and installation on a multi-story commercial building
  • Ladder modifications: height extension and adjusted mounting legs
  • Grab rails and non-slip safety tape for compliance
  • Cutting/fitting through exterior foam insulation for proper attachment
Request Similar Work All Services
Billboard structure welding and reinforcement near highway
Highway • Reinforcement

Billboard Structure — Highway Sign Steel Reinforcement (AWS D1.1)

Kings Mobile Welding supported a highway-adjacent billboard installation by performing structural welding and reinforcement on the sign support frame. We coordinated with the crew on lift planning and access, verified fit-up, and delivered clean, code-compliant welds for long-term service under wind loading and vibration.

  • AWS D1.1 structural welding for load-bearing connections
  • Coordination with crane/aerial lift operations and site safety
  • Field modifications to keep installation schedules moving
Request Similar Work Subcontractor Support
Solar farm pile splice welding (galvanized W6x9 pile)
Solar • Pile Splice

Solar Farm — Galvanized Pile Splice Welding (W6×9)

We mobilized to a utility-scale solar site to splice two sections of a W6×9 steel pile with a galvanized coating (ASTM A123). The scope required a partial penetration groove weld using E70-class filler metal, completed with controlled technique to achieve a verified minimum of 1/8" penetration by visual inspection.

  • Field splice welding on driven piles and structural members
  • Galvanized steel handling and prep for consistent weld quality
  • Inspection-ready welds meeting project acceptance requirements
Request Similar Work DOT / Gov
Dump trailer modification for Christopher Newport University grounds crew
Custom Fabrication

University Grounds — Dump Trailer Leaf Vacuum Modification

Christopher Newport University’s grounds maintenance team needed a safe way to mount a large leaf vacuum to an existing dump trailer. We designed and installed a reinforced steel framework and mounting system tied into the trailer’s structure without compromising capacity or balance.

  • Custom steel framing and brackets for leaf vacuum mounting
  • Reinforced trailer structure for long-term durability
  • On-site fit-up to match existing equipment and workflow
Request Similar Work All Services
Mobile welding and steel floor replacement on a landscaping dump truck in Yorktown Virginia
Fleet Repair • Mobile Welder

Commercial Fleet — Landscaping Dump Truck Structural Retrofit

A landscaping company in Yorktown, Virginia hired us for on-site welding and structural repair on a working dump truck. We removed deteriorated plastic flooring/walls and installed heavy-duty steel sheeting. The scope also included replacing severely rusted structural tubing to restore strength and load capacity—minimizing downtime for the client’s fleet.

  • Removal of deteriorated plastic flooring and wall panels
  • Steel sheet floor and reinforced side wall installation
  • Structural tubing replacement tied into the original frame
  • Mobile welding and fabrication to reduce fleet downtime
Request Similar Work Emergency Welding
Transfer station chute resheeting with 1/4 inch steel in Franklin Virginia
Industrial Repair

Municipal Transfer Station — Heavy-Duty Transfer Chute Resheet

A municipal transfer station in Franklin, Virginia required urgent repairs to a damaged transfer chute. We mobilized over the weekend, cut/formed new 1/4" steel, and installed wear sheeting over the existing surface to restore integrity and allow operations to resume Monday.

  • Cutting and forming 1/4" steel plate to match chute geometry
  • Installation of new wear sheeting over damaged surfaces
  • Field fit-up for abrasion and impact service
  • Weekend emergency work to eliminate operational downtime
Request Similar Work Emergency Support
Asphalt milling machine drum repair and reinforcement
Heavy Equipment

Heavy Equipment — Asphalt Milling Drum Repair

We repaired and reinforced a worn milling drum on an asphalt milling machine. The drum experiences constant impact and abrasion, so our work focused on critical wear areas and getting the machine back in service fast for the paving contractor.

  • Weld repair and reinforcement at wear locations
  • Preparation for carbide cutting teeth installation
  • Field-ready solution to reduce downtime on paving projects
Request Similar Work Mobile Welding
Bow pulpit mounting reinforcement on a boat
Marine • Stainless

Marine — Bow Pulpit Foot Reinforcement

We addressed cracking and movement where bow pulpit feet mounted to the deck. We reinforced the mounting area and welded stainless plates/supports to spread load for a stronger, safer attachment while maintaining a clean marine-grade appearance.

  • Reinforcement of bow pulpit mounting points
  • Stainless steel plate and support fabrication
  • Marine-grade welding focused on strength and corrosion resistance
Request Similar Work Welding Services
Weld build-up on hay cutter blades and wear surfaces
Agricultural Repair

Agricultural — Hay Cutter Weld Build-Up

We performed weld build-up on a hay cutter so worn areas could be rebuilt instead of replaced. Mobile service allowed the repair to be completed quickly so equipment could return to the field during a critical window.

  • Weld build-up on worn components
  • Surface preparation for rebuild and new parts
  • On-site repair to keep equipment in service
Request Similar Work Mobile Welding
Industrial plant mobile welding and fabrication
Industrial Plant

Industrial Plant — Structural & Process Support

We supported a major industrial facility by modifying safety railings on a bag palletizer system to enable equipment upgrades. Using carbon steel stick welding with high-tensile electrodes, we delivered durable results aligned to production and safety requirements.

  • Structural steel fit-up and certified welds (AWS D1.1)
  • Equipment supports, platforms, rails, and safety upgrades
  • Coordination with plant safety and inspection teams
Request Similar Work Contractor Support
HVAC contractor welding supports and stands
HVAC • Rooftop Work

HVAC Contractor — Brackets, Stands & Retrofits

We partnered with an HVAC contractor to design and fabricate freestanding steel support stands for air conditioning units. The original mounting building was scheduled for demolition, requiring a stable alternative. We built custom welded frames and installed them on-site so systems stayed operational.

  • Custom frames/brackets for air handlers and condensers
  • Roof-safe procedures and durable finishes
  • Rapid response to keep installs on schedule
Request Similar Work Mobile Fabrication
Marine welding for docks and vessels
Marine Fabrication

Marine — Dock & Vessel Repairs

We provided custom stainless fabrication and pipe modification to integrate with a davit system—cutting, aligning, and welding stainless pipes to create an attachment point for a solar arch support. The result was corrosion-resistant and precision-fit for harsh marine conditions.

  • Dock and pier repairs, safety rails, ladders
  • Stainless/aluminum welding for marine environments
  • Clean finish and corrosion mitigation practices
Request Similar Work Stainless & Aluminum
Personnel stock lift hinge repair in a warehouse
Warehouse Maintenance

Warehouse — Personnel Stock Lift (PSL) Hinge Repair

A warehouse client contacted us after a hinge failed on their personnel stock lift (PSL). We removed damaged components, fabricated upgraded hinge plates and pins, welded with proper alignment and clearance, then verified smooth operation so equipment could return to service.

  • Removal of damaged hinge components and inspection of structure
  • Fabrication of new hinge plates/pins with upgraded thickness
  • Precision welding, alignment, and functional verification
Request Similar Work Fast Response
Industrial stair repair and access solutions
Stairs • Rails • Access

Industrial Contractor — Stair Repairs & Access

We mobilized for an urgent stair repair at a commercial building. After removing the failed component, we fabricated and installed a steel replacement on-site under a tight deadline—restoring safe access and keeping the contractor schedule intact.

  • Stairs, treads, handrails, platforms and catwalks
  • Field fit-up, clean welds, inspection-ready finish
  • Safety and access improvements with minimal downtime
Request Similar Work Structural Welding
Need a mobile welding contractor for your next project?

If you need AWS D1.1 structural welding, field fit-up, emergency repairs, or inspection-ready workmanship, send your scope + location and we’ll respond quickly.

Request a Quote Call 757-231-6809